Coverage Rate If one coat application is desired, apply 1 coat at 50 sq/ft per gallon. If applying in 2 coats, apply each coat at 1 gallon per 100 sq/ft. Finished coverage will be the same, at covering 250 sq/ft of roof surface per 5 gallon bucket.. Textured, porous, and worn surfaces may require more product to cover. Dry Time Rain Safe: 60 minutes. Dry to Recoat 6 hours, Full Cure 72 Hours at 70 �F and 50% relative humidity at 2 gallons per square; dry times will be accelerated by higher temperatures and higher humidity; cooler weather, thicker films, poor air flow and low humidity can slow dry time. Uses Metal single ply, smooth BUR, Modified Bitumen, polyurethane foam, concrete, EPDM, Hypalon, exiting asphaltic & elastomeric roof coatings: Not for use on roof shingles

TUNDRA SILICONE ROOF COAT-GAL

$134.99

ELASTOMERIC WHT 12-YR

$224.99

Coverage Rate It is recommended to prime the roof substrate with Kool Seal Elastomeric Base Coat Gray at 50-100 sq ft per gallon followed by Kool Seal Elastomeric Finish Coat. at 50-100 sq ft per gallon per coat. Rough/porous surfaces will require additional coating. Two coats recommended. Dry Time Exposure to rain or heavy dew: 4-6 hours. Between coats and before foot traffic: 24 hours minimum Uses Metal single ply, smooth BUR, Modified Bitumen, polyurethane foam, concrete, EPDM, Hypalon, exiting asphaltic & elastomeric roof coatings: Not for use on roof shingles

KS ELASTOMERIC WHT 10-YR

$174.99

ELASTOMERIC WHT 7-YR

$119.99

ELASTOMERIC WHT 5 YRS

$109.99

Coverage Rate It is recommended to prime the roof substrate with Kool Seal Elastomeric Base Coat Gray at 50-100 sq ft per gallon followed by Kool Seal Elastomeric Finish Coat. at 50-100 sq ft per gallon per coat. Rough/porous surfaces will require additional coating. Two coats recommended. Dry Time Exposure to rain or heavy dew: 4-6 hours. Between coats and before foot traffic: 24 hours minimum Fill Level 4.75 Gallon Pail Uses Metal single ply, smooth BUR, modified bitumen, polyurethane foam, concrete, EPDM, Hypalon, exiting asphaltic & elastomeric roof coatings: Not for use on roof shingles

KOOL-LASTIK UNDERCOATING GRAY

$154.99

Coverage Rate Apply at 50-100 sq ft per gallon per coat. Rough/porous surfaces will require additional coating. Two coats recommended. Must be top coated with Kool Seal Elastomeric Finish Coats. Dry Time Exposure to rain or heavy dew: 4-6 hours. Between coats and before foot traffic: 24 hours minimum Uses Metal single ply, smooth BUR, Modified Bitumen, polyurethane foam, concrete, EPDM, Hypalon, exiting asphaltic & elastomeric roof coatings: Not for use on roof shingles